Victron / Inverter Charger
EasySolar 12/1600/70-16 MPPT 100/50
An inverter charger converts DC electricity from a battery into AC power for appliances. It also uses an AC supply to recharge the battery.
Victron EasySolar 12/1600/70-16 MPPT 100/50. MPP trackers: 16; Depth: 110 mm; Height: 745 mm; IP rating: IP21; Weight: 15 kg.
Model: EasySolar 12/1600/70-16 MPPT 100/50
Enquire about this product ↗Technical specifications
- VE.bus communication port
- Two RJ45 terminals
- Remote terminal type
- Screw terminal two pole
- Relay terminal type
- Screw terminal 3-pole
- PV connection terminal type
- MC4 connectors (three pairs)
- Battery connection terminal type
- Red and black 1.5 meter cable
- AC connection terminal type
- G-ST18i plug
- Colour (manufacturer)
- Blue (RAL 5012)
- Material (manufacturer)
- Aluminium
- AC output frequency ±0.1% (adjustable)
- 50 Hz
- AC input frequency range
- [45, 65] Hz
- AC Input voltage range
- [187, 265] VAC
- AC output voltage ±2% (adjustable)
- 230 VAC
- Charge algorithm
- Adaptive, 4-stage
- Charge voltage absorption (adjustable)
- 14.4 VDC
- Charge voltage float (adjustable)
- 13.8 VDC
- Charge voltage storage (adjustable)
- 13.2 VDC
- Communication Port
- VE.Direct
- Programming via computer or app
- Yes
- Continuous power at 25°C (Nonlinear load, crest factor 3:1)
- 1,600 VA
- Continuous inverter AC output power at 25°C
- 1,300 W
- Continuous inverter AC output power at 40°C
- 1,200 W
- DC Input voltage range
- [9.5, 17] VDC
- Fan assisted cooling
- Yes
- Remote terminal
- On / Off / Charger only
- Maximum efficiency
- 92 %
- Maximum humidity (non-condensing)
- 95 %
- Maximum efficiency solar charger
- 98 %
- Maximum charge current (up to 25°C ambient)
- 70 A
- Maximum output current solar
- 50 A
- Maximum PV open circuit voltage
- 100 V
- Maximum PV power (manufacturer)
- 700 W
- Operating temperature range (fan assisted cooling)
- [-20, 50] °C
- Peak power rating
- 3,000 W
- PowerAssist
- Yes
- PowerControl
- Yes
- Programmable relay
- AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC
- Protections
- Output short-circuit,Overload,High battery voltage,Low battery voltage,Over temperature,AC voltage on inverter output,Excessive DC ripple
- Self consumption solar
- 10 mA
- Solar charger model
- MPPT 100/50
- Temperature Sensor
- Included
- Transfer switch AC current rating
- 16 A
- Zero Load Power
- 8 W
- Zero load power in search mode
- 2 W
- AC output voltage
- 230 VAC
- Apparent output power
- 1600 VA
- Battery charge current
- 70 A
- Continuous output power
- 1300 W
- Depth
- 110 mm
- Height
- 745 mm
- IP rating
- IP21
- MPP trackers
- 16
- Nominal DC voltage
- 12 V
- Operating temperature
- -20 to 50 °C
- Output frequency
- 50 Hz
- Transfer switch current
- 16 A
- Weight
- 15 kg
- Width
- 214 mm
- Source list category
- Inverter / Charger All-In-One
- Source list detail
- 745x214x110, 12kg