Victron / Battery chargers
Phoenix Smart IP43 Charger 12/30 (1+1)
Choose a variation
Victron Phoenix Smart IP43
Battery chargers convert AC power into controlled DC power to recharge batteries.
Victron Phoenix Smart IP43 Charger 12/30 (1+1). Nominal DC voltage: 12 V; Rated charge current: 30 A; Charge outputs: 1+1; Weight: 2.7 kg; IP rating: IP43.
Model: Phoenix Smart IP43 Charger 12/30 (1+1)
Enquire about this product ↗Technical specifications
Power & capacity2 fields
- No load power consumption
- 1 W
- Power supply mode
- Yes
Electrical specifications15 fields
- AC input voltage
- 120 V - 240 V
- Charge outputs
- 1+1
- Nominal DC voltage
- 12 V
- Rated charge current
- 30 A
- Charge voltage storage
- Normal: 13.2V High: 13.2V Li-ion: 13.5V
- Charge voltage Absorption
- Normal: 14.4V High: 14.7V Lithium: 14.2V
- Charge voltage float
- Normal: 13.8V High: 13.8V Li-ion: 13.5V
- DC input voltage range
- [90, 375] VDC
- AC input frequency range
- [45, 65] Hz
- AC input voltage range
- [85, 250] VAC
- Back current drain
- 1 mA
- Charge Current Low Mode
- 15 A
- Number of fully rated charge outputs
- 1
- Maximum efficiency
- 95 %
- Low current starter battery output (4A)
- Yes
Connections & control7 fields
- Relay Terminal Connection
- Screw terminal 3-pole
- Remote On Off Terminal Connection
- Screw terminal two pole
- Starter battery terminal type
- Screw terminal two pole
- AC connection terminal type
- Inlet IEC 320 C14 with retainer clip (AC cord ordered separately)
- Battery connection terminal type
- Screw terminals 16 mm² (6 AWG)
- Remote on/off terminal
- Yes
- Data Communication
- Bluetooth,VE.Direct
Physical & installation7 fields
- Depth
- 116 mm
- Height
- 180 mm
- Operating temperature
- [-20, 60] °C
- Weight
- 2.7 kg
- Width
- 249 mm
- Temperature compensation (adjustable)
- -16 mV/°C
- Temperature Sensor
- Optional (Smart Battery Sense)
Other specifications10 fields
- Charging algorithm
- Adaptive, 6-stage
- IP rating
- IP43
- Programable relay
- SPDT - 5 A up to 250 VAC / 5 A up to 28 VDC
- Protections
- Battery reverse polarity (fuse not user accessible),Output short-circuit,Over temperature
- Powe rfactor
- 1
- Ouput fully rated up to
- 40 °C
- Fully programable
- Yes
- Linearly Derating between 40 and 60 °C
- 20 %
- Lithium compatible
- Yes
- Maximum humidity (non-condensing)
- 95 %
Product information4 fields
- Colour (manufacturer)
- Blue (RAL 5012)
- Material (manufacturer)
- Aluminium
- Source list category
- Battery Charger IP43
- Source list detail
- 180x249x100, 3.5kg